Basic data | |||||||
---|---|---|---|---|---|---|---|
Series | MLC 500 | ||||||
Device type | Receiver | ||||||
Contains | 2x BT-NC sliding block | ||||||
Application | Finger protection | ||||||
Characteristic parameters | |||||||
Type | 4, IEC/EN 61496 | ||||||
SIL | 3, IEC 61508 | ||||||
SILCL | 3, IEC/EN 62061 | ||||||
Performance Level (PL) | e, EN ISO 13849-1 | ||||||
PFHD | 7.73E-09 per hour | ||||||
Mission time | 20 years, EN ISO 13849-1 | ||||||
Category | 4, EN ISO 13849 | ||||||
Protective field data | |||||||
Resolution | 14 mm | ||||||
Protective field height | 900 mm | ||||||
Optical data | |||||||
Synchronization | Optical between transmitter and receiver | ||||||
Electrical data | |||||||
Protective circuit | Short circuit protected, Overvoltage protection | ||||||
Performance data | |||||||
Supply voltage UB | 26.5 ... 31.6 V | ||||||
Current consumption from AS-i circuit | 150 mA | ||||||
Protective circuit | Short circuit protected, Overvoltage protection | ||||||
Timing | |||||||
Response time | 20 ms | ||||||
Restart delay time | 100 ms | ||||||
Interface | |||||||
Type | AS-Interface Safety at Work | ||||||
AS-i | |||||||
Function | Process | ||||||
AS-i profile | S-0.B.F | ||||||
Slave address | 1..31 programmable, default=0 | ||||||
Cycle time acc. to AS-i specifications | Max. 5 ms | ||||||
Type | AS-Interface Safety at Work | ||||||
Connection | |||||||
Number of connections | 1 Piece(s) | ||||||
Connection 1 | |||||||
Type of connection | Connector | ||||||
Function | Machine interface | ||||||
Thread size | M12 | ||||||
Type | Male | ||||||
Material | Metal | ||||||
No. of pins | 5 -pin | ||||||
Number of connections | 1 Piece(s) | ||||||
Cable properties | |||||||
Permissible conductor cross section, typ. | 0.25 mm² | ||||||
Length of connection cable, max. | 100 m | ||||||
Permissible cable resistance to load, max. | 200 Ω | ||||||
Number of connections | 1 Piece(s) | ||||||
Mechanical data | |||||||
Dimension (W x H x L) | 29 mm x 966 mm x 35.4 mm | ||||||
Housing material | Metal, Aluminum | ||||||
Lens cover material | Plastic / PMMA |