Характеристики и описание
Описание оборудования | |
|---|---|
| IDENTControlCompact control interface With CC-Link V2 interface | |
General specifications | |
| Number of read/write heads | max. 2 alternatively 1 read/write head and 1 trigger sensor |
| UL File Number | E87056 |
Indicators/operating means | |
| LEDs 1, 2 | Status indicator for read/write heads green: command at read/write head active yellow: approx. 1 second long, if command was successfully executed |
| LEDs CH1, CH2 | green: read head detected red: Configuration error |
| LED PWR/ERR | green: power on red: Hardware fault |
| LED L RUN | green: on, data communication active |
| LED L ERR | red: on, invalid rotary switch setting or data transfer failure red: flashing, rotary switch setting changed since last switched on |
| Rotary switch | Address setting 01 ... 64 (decimal) Station no.: 0 ... 6 (x10) Station no.: 0 ... 9 (x1) Baud rate setting: 0 ... 4 Extended cyclic setting: 0, 1, 2, 4, 8 |
Electrical specifications | |
| Rated operating voltage | 20 ... 30 V DC , PELV |
| Ripple | ? 10 % at 30VDC |
| Current consumption | ? 4 A incl. read/write heads |
| Power consumption | 3.5 W Without read/write heads |
| Galvanic isolation | basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff |
Interface 1 | |
| Interface type | CC-Link |
| Physical | RS-485 |
| Protocol | CC-Link |
| Transfer rate | 156; 625 kBit/s 2,5;5;10 Mbit/s |
Interface 2 | |
| Interface type | Diagnostic Interface |
| Physical | RS 232 |
| Protocol | ASCII |
| Transfer rate | 38.4 kBit/s |
Directive conformity | |
| Electromagnetic compatibility | |
Standard conformity | |
| Degree of protection | IEC60529:2001 |
Ambient conditions | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Climatic conditions | air humidity max. 96 % Salt spray resistant to EN60068-2-52 |
| Shock and impact resistance | Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6 Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27 |
Mechanical specifications | |
| Degree of protection | IP67 |
| Connection | Read/write heads: shielded, 4-pin, M12 connector Power supply: M12 connector Protective earth: M4 earthing screw Diagnostic RS232: M8 connector CC-Link: M12 connector, A-coded |
| Material | |
| Installation | screw fixing |
| Mass | approx. 300 g |
Описание оборудования
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
Control interface unit IC-KP2-2HB18-2V1
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии