Ultrasonic direct detection sensor UB100-F77-E0-V31 - фото 1 - id-p95194990

Характеристики и описание

Описание оборудования
Ultrasonic direct detection sensor
General specifications
Sensing range	10 ... 100 mm
Adjustment range	30 ... 100 mm
Dead band	0 ... 10 mm
Standard target plate	20 mm x 20 mm
Transducer frequency	approx. 400 kHz
Nominal ratings
Time delay before availability	? 150 ms
Limit data
Permissible cable length	max. 300 m
Indicators/operating means
LED yellow	switching state and flashing: Teach-In
Electrical specifications
Rated operating voltage	24 V DC
Operating voltage	20 ... 30 V DC , ripple10%_SS ; 12 ... 20 V DC sensitivity reduced to 90 %
No-load supply current	? 20 mA
Input
Input type	1 program input
Level	low level : 0 ... 0.7 V (Teach-In active) high level : U_B or open input (Teach-In inactive)
Input impedance	16 k?
Pulse length	? 3 s
Output
Output type	1 switch output E0, NPN, NO
Rated operating current	200 mA , short-circuit/overload protected
Voltage drop	? 2 V
Switch-on delay	? 50 ms
Repeat accuracy	± 1 mm
Switching frequency	10 Hz
Range hysteresis	typ. 2.5 mm
Off-state current	? 0.01 mA
Temperature influence	+ 0.17 %/K
Compliance with standards and directives
Standard conformity
Approvals and certificates
UL approval	cULus Listed, General Purpose
CCC approval	CCC approval / marking not required for products rated ?36 V
Ambient conditions
Ambient temperature	-10 ... 50 °C (14 ... 122 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Shock resistance	30 g , 11 ms period
Vibration resistance	10 ... 55 Hz , Amplitude ± 1 mm
Mechanical specifications
Connection type	M8 x 1 connector , 4-pin
Degree of protection	IP67
Material
Installation position	any position
Mass	10 g
Tightening torque, fastening screws	max. 0.2 Nm